Instructions on How To Use Trampoline Wheels
DO NOT JUMP ON THE TRAMPOLINE WITH WHEELS IN THE DOWN POSITION.
Trampoline Style
Currently the trampoline wheels are set up to work with trampoline legs that are perpendicular to the ground. If you have a trampoline with the legs on an angle, contact us before ordering.Measuring the Trampoline Legs
Measure the diameter (diameter = circumference/3.14) of your trampoline legs so we can send you the proper size clamps for your application.Clamp sizes start at 1 1/8" and go up in 1/8" increments up to 2". If you have a trampoline with the legs larger than 2", please contact us before ordering.
See: Order Today (drop down window) for clamp sizes.
Do not jump on the trampoline with the wheels in the down position. This will possibly result in damage to the trampoline and the trampoline wheels.
Engaging the trampoline wheels:
1. Unlatch the trampoline wheel using either your hand or your foot as shown. (Photo 1 and Photo 2)
2. Lift the trampoline until the wheel assembly drops to the bottom of the slot. (Photo 3)
3. Lower the trampoline to the ground. (Photo 4)
Disengaging the trampoline wheels:
1. Lift the trampoline. (Photo 4)
2. While the wheel is off the ground, use your foot to unlatch the wheel (light pressure on the knob counterclockwise) and lower the trampoline to the ground in the same motion. (Photo 1)
3. Slide the trampoline wheel assembly to the top so that it latches. (it keeps the trampoline wheels off the ground) (Photo 5)
How to use it: Roll over the photos to see a larger photo.
 |
 |
 |
 |
 |